Gravely Model L or C Shipper Shaft Shifter Arm Spacer Bushing


Description for the
Gravely Model
L or C Shipper Shaft
Shifter Arm Spacer Bushing

Shipper Shaft Shifter Arm Spacer Bushing is mounted on top of one side of the shipper shaft support guide that is located at the base of the shipper shaft assembly mounted on the advance casting of the models "L", "C", and 500, 5000 series two wheel tractors, plus the 400 series 4 wheel rider tractor. These shipper shaft shifter arm spacer bushing were machined with two different size mounting holes, either for 1/4" or 5/16" mounting bolts, and two different heights, subject to the model it was installed. Its function is to hold the remote shift arm as it moves to rotate the shipper shaft body 180 degrees, transmitting motion through to the trunnion block which controls the PTO clutch. These shipper shaft assemblies were operated one of two ways; either with a short handle threaded into the shipper shaft body or with a control rod or lever located at the operator position. These spacer bushings are used with the latter.

As with many of our items, this shipper shaft shifter arm spacer bushing is made of 4140 chrome-moly steel. It has been hardened throughout for strength and wear resistance.

Cause for replacement is due to the wear created by the shift lever particularly when exposed to dirt and grit from tractor operation.

This is an equivalent replacement of the OEM item.

Thank you for looking to Cogan Valley Machine for your quality Gravely after-market parts.

No comments:

Post a Comment

Please offer your thought about what you see in our world. We would also appreciate any suggestions of other needed products for us to consider for manufacture. Thank you for visiting our world.